Morphological Evolution Research Articles

Formation of partially embedded Au nanostructures: Ion beam irradiation on thin film.

The Au partially embedded nanostructure (PEN) is synthesized by ion irradiation on an Au thin film deposited on a glass substrate using a 50 keV Ar ion. Scanning electron microscopy results show ion beam-induced restructuring from irregularly shaped nanostructures (NSs) to spherical Au NSs, and further ion irradiation leads to the formation of well-separated spherical nanoparticles. Higuchi's algorithm of surface analysis is utilized to find the evolution of surface morphology with ion irradiation in terms of the Hurst exponent and fractal dimension. The Au PEN is evidenced by Rutherford backscattering spectrometry and optical studies. Also, the depth of the mechanism behind synthesized PEN is explained on the basis of theoretical simulations, namely, a unified thermal spike and a Monte Carlo simulation consisting of dynamic compositional changes (TRIDYN). Another set of plasmonic NSs was formed on the surface by thermal annealing of the Au film on the substrate. Glucose sensing has been studied on the two types of plasmonic layers: nanoparticles on the surface and PEN. The results reveal the sensing responses of both types of plasmonic layers. However, PEN retains its plasmonic behavior as the NSs are still present after washing with water, which demonstrates the potential for reusability. RESEARCH HIGHLIGHTS: Synthesis of PENs by ion irradiation Utilization of Higuchi's algorithm to explore the surface morphology. Unified thermal spike and TRIDYN simulations being used to explain the results. Glucose is only used as a test case for reusability of substrate.

Taking a Tailored Approach to Material Design: A Mechanistic Study of the Selective Localization of Phase-Separated Graphene Microdomains.

To achieve multifunctional properties using nanocomposites, selectively locating nanofillers in specific areas by tailoring a mixture of two immiscible polymers has been widely investigated. Forming a phase-separated structure from entirely miscible molecules is rarely reported, and the related mechanisms to govern the formation of assemblies from molecules have not been fully resolved. In this work, a novel method and the underlying mechanism to fabricate self-assembling, bicontinuous, biphasic structures with localized domains made up of amine-functionalized graphene nanoplatelets are presented, involving the tailoring of compositions in a liquid processable multicomponent epoxy blend. Kinetics studies were carried out to investigate the differences in reactivity of various epoxy-hardener pairs. Molecular dynamics simulations and in situ optical photothermal infrared spectroscopy measurements revealed the trajectories of different components during the early stages of polymerization, supporting the migration (phase behavior) of each component during the curing process. Confirmed by the phase structure and the correlated chemical maps down to the submicrometer level, it is believed that the bicontinuous phase separation is driven by the change of the miscibility between various building blocks forming during polymerization, leading to the formation of nanofiller domains. The proposed morphology evolution mechanism is based on combining solubility parameter calculations with kinetics studies, and preliminary experiments are performed to validate the applicability of the mechanism of selectively locating nanofillers in the phase-separated structure. This provides a simple yet sophisticated engineering model and a roadmap to a mechanism for fabricating phase-separated structures with nanofiller domains in nanocomposite films.

The global pattern of epiphytic liverwort disparity: insights from Frullania

The geographical and ecological patterns of morphological disparity are crucial to understand how species are assembled within communities in the context of the evolutionary history, morphological evolution and ecological interactions. However, with limited exceptions, rather few studies have been conducted on the global pattern of disparity, particularly in early land plants. Here we explored the spatial accumulation of disparity in a morphologically variable and species rich liverwort genus Frullania in order to test the hypothesis of latitude disparity gradient. We compiled a morphological data set consisting of eight continuous traits for 244 currently accepted species, and scored the species distribution into 19 floristic regions worldwide. By reconstructing the morphospace of all defined regions and comparisons, we identified a general Gondwana-Laurasia pattern of disparity in Frullania. This likely results from an increase of ecological opportunities and / or relaxed constraints towards low latitudes. The lowest disparity occurred in arid tropical regions, largely due to a high extinction rate as a consequence of paleoaridification. There was weak correlation between species diversity and disparity at different spatial scales. Furthermore, long-distance dispersal may have partially shaped the present-day distribution of Frullania disparity, given its frequency and the great contribution of widely distributed species to local morphospace. This study not only highlighted the crucial roles of paleoenvironmental changes, ecological opportunities, and efficient dispersal on the global pattern of plant disparity, but also implied its dependence on the ecological and physiological function of traits.

Visualizing Electrochemical CO2 Conversion via the Emerging Scanning Electrochemical Microscope: Fundamentals, Applications and Perspectives.

With the rapid development and maturity of electrochemical CO2 conversion involving cathodic CO2 reduction reaction (CO2RR) and anodic oxygen evolution reaction (OER), conventional ex situ characterizations gradually fall behind in detecting real-time products distribution, tracking intermediates, and monitoring structural evolution, etc. Nevertheless, advanced in situ techniques, with intriguing merits like good reproducibility, facile operability, high sensitivity, and short response time, can realize in situ detection and recording of dynamic data, and observe materials structural evolution in real time. As an emerging visual technique, scanning electrochemical microscope (SECM) presents local electrochemical signals on various materials surface through capturing micro-current caused by reactants oxidation and reduction. Importantly, SECM holds particular potentials in visualizing reactive intermediates at active sites and obtaining instantaneous morphology evolution images to reveal the intrinsic reactivity of active sites. Therefore, this review focuses on SECM fundamentals and its specific applications toward CO2RR and OER, mainly including electrochemical behavior observation on local regions of various materials, target products and onset potentials identification in real-time, reaction pathways clarification, reaction kinetics exploration under steady-state conditions, electroactive materials screening and multi-techniques coupling for a joint utilization. This review undoubtedly provides a leading guidance to extend various SECM applications to other energy-related fields.

Sperm competition favours intermediate sperm size in a hermaphrodite.

Sperm competition is a potent mechanism of post-copulatory sexual selection that has been found to shape reproductive morphologies and behaviours in promiscuous animals. Especially sperm size has been argued to evolve in response to sperm competition through its effect on sperm longevity, sperm motility, the ability to displace competing sperm and ultimately fertilization success. Additionally, sperm size has been observed to co-evolve with female reproductive morphology. Theoretical work predicts that sperm competition may select for longer sperm but may also favour shorter sperm if sperm size trades off with number. In this study, we studied the relationship between sperm size and post-mating success in the free-living flatworm, Macrostomum lignano. Specifically, we used inbred isolines of M. lignano that varied in sperm size to investigate how sperm size translated into the ability of worms to transfer and deposit sperm in a mating partner. Our results revealed a hump-shaped relationship with individuals producing sperm of intermediate size having highest sperm competitiveness. This finding broadens our understanding of the evolution of sperm morphology by providing empirical support for stabilizing selection on sperm size under sperm competition.

Biological sex, sex steroids and sex chromosomes contribute to mouse cardiac aging.

After menopause, the incidence of cardiovascular disease rapidly rises in women. The disappearing protection provided by sex steroids is a consequence of the development of many risk factors. Preclinical studies are necessary to understand better the effects of ovarian hormones loss cardiac aging. To mimic menopause in mice and study its consequences, we delayed ovariectomy at 12 months and followed animals for 12 months. Using RNA sequencing, we investigated changes in the myocardial exome with aging. In addition, with four-core genotypes (FCG) transgenic mice, we studied sex chromosome effects on cardiac aging. Heart weight increased from 3 to 24 months (males + 35%, females + 29%). In males, 75% of this increase had occurred at 12 months; in females, only 30%. Gonadectomy of mice at 12 months blocked cardiac hypertrophy in both sexes during the second year of life. The dosage of the X chromosomes did not influence cardiac growth in young and older mice. We performed an RNA sequencing study in young and old mice. We identified new highly expressed genes modulated during aging (Bdh, Myot, Cpxm2, and Slc38a1). The myocardial exome in older animals displayed few differences related to the animal's sex or the presence or absence of sex steroids for a year. We show that the morphological evolution of the heart depends on the biological sex via gonadal sex hormone actions. The myocardial exome of old male and female mice is relatively similar. Our study emphasizes the need to consider sex steroid effects in studying cardiac aging.

Exploration of morphological coherence in open clusters with a "core-shell'' structure

The morphology of open clusters plays a major role in the study of their dynamic evolution. The study of their morphological coherence, namely, the three-dimensional (3D) difference between the inner and outer morphologies of open clusters, allows us to obtain a better understanding of the morphological evolution of open clusters. We aim to investigate the morphological coherence of 132 open clusters with up to 1 kpc from the Sun in the three-dimensional (3D) space within the heliocentric cartesian coordinate frame. The 132 open clusters have a 3D core-shell structure and conform to the ellipsoidal model, with all of them coming from a catalog of publicly available clusters in the literature. We employed the ellipsoid fitting method to delineate the 3D spatial structure of the sample clusters, while using the morphological dislocation (MD) defined in our previous work and the ellipticity ratio (ER) of the clusters' inner and outer structures to characterize the morphological coherence of the sample clusters. The results show an inverse correlation between the ER of the sample clusters and the number of their members, indicating that sample clusters with a much more elliptical external morphology than internal shape generally tend to host a large number of members. Meanwhile, a slight shrinking of the MD of the sample clusters with their members' number may shed light on the significant role of the gravitational binding of the sample clusters in maintaining their morphological stability. Moreover, there are no correlations between the MD and ER of the sample clusters and their age. They are also not significantly correlated with the X-axis, the Y-axis, their orbital eccentricities, and the radial and vertical forces on them. However, the ER of the sample clusters displays some fluctuations in the distributions between it and the above covariates, implying that the morphologies of the sample clusters are sensitive to the external environment if sample effects are not taken into account. Finally, the analysis of the 3D spatial shapes of sample clusters with a small ER or a large ER demonstrates that the number of members lays an important foundation for forming a dense internal system for sample clusters. At the same time, the MD of the sample clusters can serve well as an indicator of their morphological stability, which is built upon a certain amount of member stars. We present a new insight into the morphological coherence of open clusters, attributed to the combination of their gravitational binding capacity and external environmental perturbations.

Peculiar Behavior of Methyl Methacrylate Emulsion Polymerization-Induced Self-Assembly Mediated by RAFT Using Poly(Methacrylic Acid) Macromolecular Chain Transfer Agent.

Reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) is successfully performed in water in the presence of a poly(methacrylic acid) (PMAA) macromolecular chain transfer agent (macroCTA) leading to the formation of self-stabilized PMAA-b-PMMA amphiphilic block copolymer particles. At pH3.7, the reactions are well-controlled with narrow molar mass distributions. Increasing the initial pH, particularly above 5.6, results in a partial loss of reactivity of the PMAA macroCTA. The effect of the degree of polymerization (DPn) of the PMMA block, the solids content, the nature of the hydrophobic segment, and the pH on the morphology of the obtained diblock copolymer particles is then investigated. Worm-like micelles are formed for a DPn of PMMA of 20 (PMMA20), while "onion-like" particles and spherical vesicles are obtained for PMMA30 and PMMA50, respectively. In contrast, spherical particles are obtained for the DPns higher than 150. This unusual evolution of particle morphologies upon increasing the DPn of the PMMA block seems to be related to hydrogen bonds between hydrophilic MAA and hydrophobic MMA units.

Influence of land use change on habitat quality: a case study of coal mining subsidence areas.

Revealing the spatiotemporal evolution characteristics and key driving processes behind the habitat quality is of great significance for the scientific management of production, living, and ecological spaces in resource-based cities, as well as for the efficient allocation of resources. Focusing on the largest coal-mining subsidence area in Jiangsu Province of China, this study examines the spatiotemporal evolution of land use intensity, morphology, and functionality across different time periods. It evaluates the habitat quality characteristics of the Pan'an Lake area by utilizing the InVEST model, spatial autocorrelation, and hotspot analysis techniques. Subsequently, by employing the GTWR model, it quantifies the influence of key factors, unveiling the spatially varying characteristics of their impact on habitat quality. The findings reveal a notable surge in construction activity within the Pan'an Lake area, indicative of pronounced human intervention. Concurrently, habitat degradation intensifies, alongside an expanding spatial heterogeneity in degradation levels. The worst habitat quality occurs during the periods of coal mining and large-scale urban construction. The escalation in land use intensity emerges as the primary catalyst for habitat quality decline in the Pan'an Lake area, with other factors exhibiting spatial variability in their effects and intensities across different stages.

Research on the epitaxial direction control and mechanism of polycrystalline diamond grains

The control of diamond film growth is crucial for the application of diamond films. In this article, different diamond film samples were prepared by adding nitrogen and oxygen in different proportions during the growth process. The key conditions for controlling the growth of diamond film with preferred orientation were obtained using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy characterizations. During the growth process, the growth of the diamond film with (100) preferred orientation could be achieved by adjusting nitrogen content. It was necessary to introduce nitrogen and oxygen in the growth process, and precisely regulate the ratio of the two to obtain the (111) preferred orientation of the diamond film. When only oxygen was introduced during growth, the preferred orientation of the diamond could not be achieved, leading to a smaller grain size and poorer crystal quality. From the perspective of grain morphology to film morphology evolution, this study obtained the crystal orientation control conditions during the diamond film growth, which has important guiding significance for the application of the diamond film. This study seeks to drive progress in the large-scale growth of readily machinable diamond and the evolution of diamond-grain optical fiber sensing through comprehensive investigations into the correlation between the preferred orientation in polycrystalline diamonds and reaction conditions.

Porous Morphology of High Grafting Density Mixed Polyelectrolyte Brushes Grown from a Y-Inimer Coating.

Mixed A/B polyelectrolyte (PE) brushes of opposite charges are grown from a Y-shaped initiator-bearing coating to facilitate intimate mixing of the A and B polyelectrolytes in a 1:1 grafting ratio. The design of the Y-shaped inimer includes both ATRP and NMP initiators attached to a common Y-junction. A copolymer of a Y-shaped inimer with glycidyl methacrylate is cross-linked to the substrate resulting in a stable ultrathin coating decorated with Y-shaped initiators. Weak PE A/B mixed brushes based on poly(methacrylic acid)/poly(2-vinylpyridine) (PMAA/P2VP) with a high grafting density of ∼1 chain/nm2 are grown by surface-initiated ATRP and NMP, respectively. Detailed morphological characterization of the PMAA/P2VP brushes in response to pH changes reveals a nanoporous morphology under conditions that maximize complex coacervate formation between oppositely charged brushes. The charge ratio between the A and B brushes is varied via the composition of the brushes to further study the morphology evolution. The effect of intimate contact between the A and B brushes on the morphology is probed by comparing with a mixed A/B PE system with random fluctuations in grafting composition. A quantitative and qualitative study of the pore evolution with pH as well as charge composition is presented using a combination of atomic force microscopy, water contact angle measurement, and image analysis using Gwyddion software. These studies demonstrate that the porous morphology is enhanced and most uniform when the brushes are grown from the Y-inimer, indicating that a 1:1 grafting ratio and intimate contact between A and B brushes are essential.

Enhancing Carbon Fiber Fabrics with ALD AlxOy Coatings: An Investigation of Thickness Effects on Weight, Morphology, Coloration, and Thermal Properties

This study explores the impact of non-stoichiometric aluminum oxide (AlxOy) coatings applied via thermal atomic layer deposition (ALD) on carbon fiber fabrics (CFFs), emphasizing volume per cycle, FESEM analyses, color transitions, and thermal stability enhancements. Using trimethylaluminum and water at 100 °C, AlxOy was deposited across a range of 1000 to 5000 ALD cycles, with film thicknesses extending up to 500 nm. This notable increase in the volume of material deposited per cycle was observed for the 3D CFFs, highlighting ALD’s capability to coat complex structures effectively. FESEM analyses revealed the morphological evolution of CFF surfaces post-coating, showing a transition from individual grains to a dense, continuous layer as ALD cycles increased. This morphological transformation led to significant color shifts from green to red to blue, attributed to structural coloration effects arising from variations in film thickness and surface morphology. Thermogravimetric analyses (TGA and dTG) indicated that the AlxOy coatings enhanced the thermal stability of CFFs, with a postponement in degradation onset observed in samples subjected to more ALD cycles. In essence, this research highlights the nuanced relationship between ALD processing parameters and their collective influence on both the aesthetic and functional properties of CFFs. This study illustrates ALD’s potential in customizing CFFs for applications requiring specific color and thermal resilience, balancing the discussion between the surface morphological changes and their implications for color and thermal behavior.

Time-varying drainage basin development and erosion on volcanic edifices

Abstract. The erosional state of a landscape is often assessed through a series of metrics that quantify the morphology of drainage basins and divides. Such metrics have been well explored in tectonically active environments to evaluate the role of different processes in sculpting topography, yet relatively few works have applied these analyses to radial landforms such as volcanoes. We quantify drainage basin geometries on volcanic edifices of varying ages using common metrics (e.g., Hack's law, drainage density, and number of basins that reach the edifice summit, as well as basin hypsometry integral, length, width, relief, and average topographic slope). Relating these measurements to the log-mean age of activity for each edifice, we find that drainage density, basin hypsometry, basin length, and basin width quantify the degree of erosional maturity for these landforms. We also explore edifice drainage basin growth and competition by conducting a divide mobility analysis on the volcanoes, finding that young volcanoes are characterized by nearly uniform fluvial basins within unstable configurations that are more prone to divide migration. As basins on young volcanoes erode, they become less uniform but adapt to a more stable configuration with less divide migration. Finally, we analyze basin spatial geometries and outlet spacing on edifices, discovering an evolution in radial basin configurations that differ from typical linear mountain ranges. From these, we present a novel conceptual model for edifice degradation that allows new interpretations of composite volcano histories and provides predictive quantities for edifice morphologic evolution.

The Application of Crystallization Kinetics in Optimizing Morphology of Active Layer in Non-Fullerene Solar Cells

Organic photovoltaics (OPVs) have attracted widespread attention and became an important member of clean energy. Recently, their power conversion efficiency (PCE) has surpassed 19%. As is well known, the morphology of the active layer in OPVs crucially influences the PCE. In consideration of the intricate interactions between the donor molecules and acceptor molecules, the precise control of the morphology of the active layer is extremely challenging. Hence, it is urgent to develop effective methods to fabricate the hierarchical structure of the active layer. One significant driving force for the morphological evolution of the active layer is crystallization. Therefore, regulating the crystallization kinetics is an effective strategy for morphology control. In this review, we present the kinetic strategies recently developed to highlight their significance and effectiveness in morphology control. By applying these kinetic strategies, the hierarchical structure, including phase separation, domain size, crystallinity, and molecular orientation of the active layer can be optimized in different blend systems, leading to an improved PCE of OPVs. The outcomes set the stage for future advancements in device performance.

Multi-layer multi-track molten pool flow and grain morphology evolution of Inconel 718 manufactured by laser powder bed fusion

Multi-layer multi-track molten pool flow and grain morphology evolution of Inconel 718 manufactured by laser powder bed fusion

Nectar and floral morphology differ in evolutionary potential in novel pollination environments.

Plants can evolve rapidly after pollinator changes, but the response of different floral traits to novel selection can vary. Floral morphology is often expected to show high integration to maintain pollination accuracy, while nectar traits can be more environmentally sensitive. The relative role of genetic correlations and phenotypic plasticity (PP) in floral evolution remains unclear, particularly for nectar traits, and can be studied in the context of recent pollinator changes. Digitalis purpurea shows rapid recent evolution of corolla morphology but not nectar traits following a range expansion with hummingbirds added as pollinators. We use this species to compare PP, heritability, evolvability and integration of floral morphology and nectar in a common garden. Morphological traits showed higher heritability than nectar traits, and the proximal section of the corolla, which regulates access to nectar and underwent rapid change in introduced populations, presented lower integration than the rest of the floral phenotype. Nectar was more plastic than morphology, driven by highly plastic sugar concentration. Nectar production rate showed high potential to respond to selection. These results explain the differential rapid evolution of floral traits previously observed in this species and show how intrafloral modularity determines variable evolutionary potential in morphological and nectar traits.

Fatigue Behaviors and Dislocation Evolution of Copper and Aluminum Alloy

Face centered cubic (FCC) metals are widely used in the field of structural materials due to their excellent mechanical properties, and their fatigue behaviors have always been a focus of attention. In this work, 1060 aluminum alloy with different processing states and copper were selected to study the high cycle fatigue performance at room temperature and high temperature. The fracture morphology and dislocation evolution were characterized through characterization methods such as scanning electron microscope (SEM) and transmission electron microscope (TEM). Based on the research, the main movement mode of dislocations (plane slip or wavy slip) is influenced by stacking fault energy (SFE), which further has a significant impact on fatigue performance. When the SFE of the FCC metal is higher, wavy slip dominates and the material is sensitive to temperature changes; on the contrary, during cyclic loadings, metal with lower SFE is dominated by plane slip, due to the reversibility of plane slip, the damage to the material with low SFE under fatigue loading is more uniform.This article is protected by copyright. All rights reserved.

Synthesis of NaYbF4:Er nanocrystals with controllable size, morphology, and multicolor upconversion luminescence for Anticounterfeiting applications

The dopant concentration of lanthanide ions plays one of the critical roles to manipulate size/morphology, photon population pathway, or luminescence color/intensity in upconversion nanoparticles (UCNCs), which have a significant effect on their application developments. Herein, a strategy is demonstrated for simultaneous size, morphology and multicolor luminescence tuning in the single doped lanthanide activator Er3+ ion system through simply tuning the concentration of Er3+ ions. The doping of different Er3+ ion amounts in NaYbF4:Er nanocrystals can control nanoparticle size (from several hundreds to tens of nanometers) and morphology. Moreover, multicolor upconversion luminescence involving green, yellow, orange and red can be obtained in the NaYbF4:Er UCNCs by changing the excitation power density of 980 nm laser. Mechanistic studies reveal the size and morphology evolution process as well as saturation/cross relaxation effects induced tunable multicolor emissions. These nanocrystals have demonstrated promising potential applications in anticounterfeiting. Our results not only provide a simple and feasible route for simultaneous size/morphology control and multicolor upconversion luminescence tuning, but also can further expand the utility of UCNCs in the frontier applications ranging from optical encoding to information security.

Morphology evolution of bacterial cellulose carbon and loaded with MnO2 microspheres for high performance supercapacitors

The rapid development of economy and technology caused numerous irreversible effects on the environment, and the rational use and storage of existing resources have became an indispensable process in modern development. Energy storage through supercapacitors can effectively alleviate part of the energy crisis. Here, the effects of heating rates on the morphology of carbonized bacterial cellulose (CBC) carbon and its electrochemical properties were studied and CBC-5 (heating rate of 5 ℃/min) with porous structure was confirmed to be supporting material for loading MnO2. The specific capacitance of CBC-5@MnO2 composites was high up to 190 F g−1 at 1 A g−1, and its capacitance retention rate was up to 96.6% after 8000 cycles. The superior electrochemical performance cannot be achieved without the cooperative effect among the metal oxides and carbon materials, which also benefits from the fast transport of ions and electrons in solution. The assembled CBC-5//CBC-5@MnO2-6 h hybrid supercapacitors exhibited largest energy density and power density values of 44.5 Wh kg−1 (at 0.2 A g−1) and 11111.1 W kg−1 (at 10 A g−1), respectively. The assembled button cells can light up small LED bulbs for at least 10 min. The porous bacterial cellulose carbon can provided possibilities for high electrode design.

Reflood oxidation performances of Cr-coated Zr-Sn-Nb alloy cladding tubes at 1000 °C∼1200 °C

Reflood plays an important role in preventing the serious accident process. In this paper, the reflood oxidation performances of Cr-coated Zr-Sn-Nb alloy cladding tubes at 1000 °C, 1100 °C and 1200 °C were studied by high-temperature steam oxidation followed by in-situ water quenching. The oxidation kinetics, macroscopic morphology, phase transformation and microstructural evolution were investigated. Cr coating can provide excellent anti-reflood oxidation protection for Zr-Sn-Nb alloy, resulting in an oxidation rate constant of only 1/4–1/7 of that of uncoated Zr-Sn-Nb alloys. However, the cladding tube degraded into fragments due to excessive thermal stress during the in-situ water quenching after reflood oxidation at 1200 °C for 4000 s. After reflood oxidation at 1000 °C and 1100 °C, the most prominent feature of the surface is a porous flocculation structure main due to the formation of volatile products, while after 1200 °C, it is a fine mackerel scale-like structure accompanied by protruding whiskers main owing to Cr3+ rapidly migrates outward to the outer surface via short circuit paths. After oxidation, the cross-section of Cr-coated Zr-Sn-Nb alloys exhibits a multi-layer structure. The thickness of each layer changes approximately linearly with oxidation time. However, due to the redox reaction, compared to that after oxidation for 2000s, the Cr2O3 layer becomes thinner and the residual Cr coating becomes thicker after oxidation at 1200 °C for 4000 s.